EL50 pressure switches permit the actuation of an electronic micro-switch upon reaching a value preset at the factory.
It works with gas and non-aggressive fluids
in very low-pressure ranges.
The instrument must be operated with
24 Volts direct current.

Technical Features:
Anodized aluminum body.
Installation position: it can be mounted in any position.
Working temperature: from -30°C to +90°C
Switching frequency: 60 cycles/min.
Switching accuracy: ± 1% of set pressure
Fixed hysteresis value: about 15% of set value
Weight: 0.2 Kg.

Electrical Features:
Electrical connection according to DIN 43650
with warning light: "ON"
Electrical protection according to
DIN 40050: IP 65
Maximum contact load:
Direct current up to 24 Volts - 2 Amp
Direct current up to 12 Volts - 1 Amp
Solid state "out" contacts
Protection against polarity inversion

Also Available:
–Fluid port made in AISI 316 stainless steel
–Viton or PTFE seals

We reserve the right to make construction modifications without prior notice

Exchange electric contacts