|
K 60.1 / 4,5 .D
HOW TO ORDER
K60 =type and range of regulation
1= 1/4"BSP threaded port, state "2" for
1/8"BSPT and "3" for 1/4"BSPT.
/4,5= preset value in Bar, omit in case you do not require preset
at factory.
.D = preset value requested in come dow of pressure, state
"U" for require the preset in up-dow pressure.
|
"K6" pressure switches are normally requested with set points
preset at the factory. It is, however, possible to change the value with a
2mm Allen wrench as an alternative to the standard M3 DIN connector.
The preset pressure is adjusted by rotating the internal screw located at
the center of the instrument. Rotate the screw clockwise to increase and
counter-clockwise to decrease the value. Mechanical stops protect both the
spring and the micro-switch from over pressurization
Technical Features:
Plated steel body.
Installation position: it can be mounted in any position.
Working temperature: from -20°C to +80°C
Switching frequency: 120 cycles/min.
Switching accuracy: ± 4% of set pressure.
Fixed hysteresis value:
K60 and K61: about 10% of set value
K64, K63 and K65: about 14% of set value
Weight: 0.18 Kg.
Electric Features:
Electrical connection according to
DIN 43650
Electrical protection according to
DIN 40050: IP65
Maximum contact load:
Alternating current up to 110 Volts - 3 Amp
Direct current up to 110 Volts – 0.15 Amp
Available
-K6X with connection fluid port made in AISI 316 stainless steel
-Viton, EPDM, PTFE seals
NOTE : the piston type versions
are available only with thread connection 1/4"BSP and 1/4"BSTP
We reserve the right to make construction modifications without prior
notice.
|
Type
|
Switching pressure range
|
Execution
|
Maximum pressure
|
|
K 60
|
0.2 > 3 Bar
|
Diaphragm
|
25 Bar
|
|
K 61
|
1 > 15 Bar
|
Diaphragm
|
25 Bar
|
|
K 63
|
5 > 50 Bar
|
Piston
|
300 Bar
|
|
K 64
|
10 > 100 Bar
|
Piston
|
300 Bar
|
|
K 65
|
20 > 200 Bar
|
Piston
|
300 Bar
|
|
Schrupp
Industries Inc
