KD5-FX electronic pressure switches can work together with the TR5 transducers or with other devices with output signals 4-20mA, and also with the non-amplified transducers of the TD 6 series, which are more economical but which offer the same performance.
Suitable for installation in front mounted panels with a hole diameter of 63 mm. In addition to indicating pressure value, it permits up to 4 set alarms, in solid state, with adjustable hysteresis and programmable NC or NO contacts.
The instrument can substitute for four pressure switches with adjustable hysteresis throughout the full scale range and as a gauge, it can be programmed in differing measurement units and it can display four inputs with differential pressures and four programmable alarms. It is also possible to select, for example, two different set points, with an NC or NO alarm and a readout of one or more of the other pressures with the added ability to see the differential value between these two and to then select another alarm point. In the meantime, the third channel, connected to the temperature transducer can show the working temperature with relative alarm.

TECHNICAL FEATURES:
Body: anodized aluminum
Installation: panels with hole 63 mm.
Working temperature: From -200C to +700C
Display: qty: 4 of 13mm
Linearization: 9 points of control
Visualization: From -999 to 9999
Decimal point: programmable
Weight: 110 gr

ELECTRIC FEATURES:
Power inputs: 15/24 VAC/DC
Outputs: 17VDC for connection to TR5 / TR6
Power consumption without alarm: 120mA
Power consumption with alarm: 200mA
Electrical protection: IP65
Stacking temperature: From -400C to +900C
Input: n° 1
Outputs: qty: 4 transistors 2A/24V
Input impedance: 100 OHMS
Involatile memory: EEPROM

We reserve the right to make construction modifications without prior notice.