KL5 electronic pressure switches permit the actuation of an electronic micro-switch upon reaching a predetermined pressure setting and to the continuous regulation of the hysteresis value. The right hand lever mounted on the instrument that is rotated forward to increase and reverse to decrease controls the maximum set point. The minimum set point of pressure hysteresis is adjusted by rotating the left hand lever of the instrument.

The instrument completely solid state, it is totally without electromechanical or dynamics parts.

It can be connected to the system with a 1/4" BSP female threaded port or to a Cetop manifold without need of adaptors.

Installation position: any position.

Working temperature: from -20°C to +80°C

Switching frequency: 200 cycles/min.

Switching accuracy: 0,6% of set pressure

Adjustable hysteresis value: from 2% to 95% of set value

Weight: 0.38 Kg.

                      12V DC *on request.

Electrical connection according to DIN 43650

Electrical protection according to

DIN 40050: IP65

Maximum contact load: 5 Amp

Medium consumption: 20mA

Involatile memory: EEPROM

Type: KLW5 with switching pressure range from 0 Bar to -1 Bar.

We reserve the right to make construction modifications without prior notice.