KTR5 electronic pressure switches actuate a relay once a preset pressure value is reached and allow regulation of the hysteresis value.

Maximum preset pressure is adjusted by operating the right trimmer located on the instrument, by rotating the screw clockwise to increase and counter-clockwise to decrease.

Minimum preset pressure (hysteresis) is found analogously by operating on the left trimmer of the instrument. The instrument, which is totally solid state, has the relay adjustment separate from alimentation.

Can be connected to the system with a 1/4" BSP female threaded port or to a Cetop manifold without any adaptors.

Installation position: It can be mounted in any position.

Working temperature: from -20°C to +80°C

Switching frequency: 120 cycles/min.

Switching accuracy: 0,6% of set pressure

Switching pressure range: 0 - 100%

Adjustable hysteresis value: from 3% and 40% of set value

Weight: 0.45 Kg.

Maximum contact load:

10A-24VDC

5A-250VAC

Electrical connection according to DIN 43650

Electrical protection according to

DIN 40050: IP65

We reserve the right to make construction modifications without prior notice.