|
"LV " sight level gauges allow the sight reading of the fluid
level through a transparent tube connected to the tank. O-ring are located
in all joining points to allow a perfect sealing even when the unit is
mounted on a non perfectly flat surface. The tube protection can be
orientated on a 180° angle and the mobile heads permit to recuperate
drilling mistakes on fixation holes centers up to + 4mm.
Besides mineral oils they can be used with other not aggressive fluids.
They can be supplied with thermometer fit inside the sight tube (LVT
series) or with electric contact when reaching minimum oil level (LVE
series).
They can be supply with 2,5 meters of maximum length.
Technical Features:
Fixing heads made of nylon
Protection made in anodized aluminum
Transparent tube made in perbex
Fixing screws made in tropicalized carbon steel Installation position:
vertical position with two taps M12 or drill two holes 13 mm of diameters.
Working temperature: from -20°C to +80°C
Maximum working pressure: 2 Bar
Electric Features
for the Lve Series:
Electric connection according to DIN 43650
Electric protection according to
DIN 40050: IP65
Maximum contact load:
Alternating current up to 48 Volts - 1 Amp
Direct current up to 48 Volts - 0,5 - Amp
Available:
Every length with a maximum of 2,5m. Executions with electric maximum
signal or intermediate points.
We reserve the right to make construction modifications without prior
notice.
|
Type
|
Holes distance
|
Mounting screws
|
Execution
|
|
LV 2
|
127 mm
|
M 12
|
Only sight level
|
|
LV 3
|
254 mm
|
M 12
|
Only sight level
|
|
LVT 2
|
127 mm
|
M 12
|
With thermometer
|
|
LVT 3
|
254 mm
|
M 12
|
With thermometer
|
|
LVE 2
|
127 mm
|
M 12
|
With NO contacts
|
|
LVE 3
|
254 mm
|
M 12
|
With NO contacts
|
|
LVSE 2
|
127 mm
|
M 12
|
Exchange contacts
|
|
LVSE 3
|
254 mm
|
M 12
|
Exchange contacts
|
|
Schrupp
Industries Inc
